超薄多線鋸機
HLBMW-100/150 型提升式超薄多線鋸，這是由華隆機械公司研發的令人驚嘆的新設備，它代表了下一代石材塊狀切割技術，配備 0.3 - 0.8 毫米超薄金剛石線，可使產量率超過 97%。它是您用于將塊狀物料切割成板材的下一款設備，具有以下更多優勢：優勢
1) 高產量 - 尺寸極小的線鋸，其切割槽深度僅為 0.4 - 0.7 毫米，可實現超過 97%的產量，比傳統產品高出 15 - 20%。
2) 石粉排放減少：超過 90%。
3) 噪音降低 - 無振動，噪音降低超過 40 分貝。
4) 可生產厚度低于 10 毫米的超薄板材。
5) 高精度可避免線鋸痕跡，并使板材平整度提高 50%。
6) 節電 - 由于切割摩擦力大大降低，電力消耗減少 50%。
7) 空間節省 - 設備占地面積減少超過 30%。
Ultra Thin Multi Wire Saw Machine
HLBMW-100/150 Block Lifting type Super Thin Multi Wire Saw, an amazing new machine developed by HUALONG Machinery defining the next generation stone block cutting technology, with 0.3-0.8mm thin diamond wire brings yield rate more than 97%. It's the next machine of yours to cut block to slabs for much more benefits as follows:
Advantage
1) High yield - Tiny wire saws with only 0.4-0.7mm cuting grooves enable a yield of over 97%, 15-20% higher than conventional ones.
2) Emission Reduction of Stone Powder: over 90%
3) Noise reduction - No vibration, reduce noise over 40 dB.
4) Ultra thin slabs below 10mm can be produced
5) High precision prevent wire marks and improves the slab flatness by 50%.
6) Power saving - reduce 50% electric power consumption because of much less cutting friction.
7) Space saving - reduce equipment footprint by more than 30%.
聯系我們，獲取完整方案!
Contact us to obtain the complete solution!
Hot Tags: hualong 5 axis cnc stone cutting machine, China, manufacturers, suppliers, factory, price, for sale, Granite Tile Polishing Machine, 5 Axis CNC Stone Saw, Double Blade Granite Quarry Machinery, Multi Balde Stone Cutting Machine, Automatic Stone Bridge Saw, CNC Sawjet
華隆機械，數控五軸橋切機，四軸橋切機，4+1橋切，5+1橋切，三軸橋切機，紅外線橋切機，石材切機，石材加工廠設備，石材拋光機，石材拋光設備，石材加工中心，臺面加工中心，水刀，水刀切割機，礦山開采設備，礦山圓盤鋸，圓盤雙刀鋸，礦山機，礦山鋸。
0594-2197723
hualongmc@163.com
聯系我們
產品中心